Woodturners Wood Lathes And Wood Turning Tools

Serious Scrapers*

  • Made from 3/8 inch A2 steel 50% heavier than the flat-bar steel of most other scrapers.
  • Provides better wear resistance and much lower vibration transfer.
  • Offers 9 inches of working tool length.
  • Straight-turned shanks allow Serious Scrapers to be dropped directly into Serious Camlock Handles a unique system offering greater reach, comfort, and convenience.

*Handles not included

Scrapers
All scrapers are 3/8 X 12
with a straight rounded tang.
Scraper Blank 1 $82.95
Half Round Scraper 1 $97.95
Square End Scraper 1 $97.95
Box Scraper 1 $97.95
Bull Nose Scraper 1 $97.95
Right Hand Scraper $97.95
Left Hand Scraper $97.95

 

Scrapers
WoodTurning Tool - Scraper Blank
Scraper Blank (1-1/2")
Wood Turning Tool - Half Round Scraper
Half Round Scraper (1-1/2")
Wood Turning Tool - Square End Scraper
Square End Scraper (1-1/2")
Wood Turning Tool - Box Scraper
Box Scraper (1-1/2")

The extended reach and added heft of the Serious scrapers allow for access to hard to reach spots and much quieter and smoother finishing cuts.

The 3/8" thick steel is 50% heavier than most scrapers, and this results in a major difference in the quality of the cut. Imagine you are finishing a deep open vase and there is an area near the interior bottom where the tool rest can not reach. The 12 inch scraper length will allow the tool to extend several inches beyond and down from the tool rest edge to produce a fine tool finish to the vase area.

These scrapers will not chatter or bounce. We do not recommend overhanging the tool rest when this is not necessary, and the finish scrape should always be produced with the scraper facing at a downward angle with the handle higher than the scraper edge.


 

Contact Information

For more information about Serious Toolworks, please write or call. We look forward to hearing from you!

Phone: 1-800-211-1484
Hours 8:00 AM - 5:00 PM
Pacific Time (Mon-Fri)
E-mail: info@serioustoolworks.com
Address: Serious Toolworks, Inc.
8900 SW Burnham Street
Suite E25
Tigard, OR 97223

Wood Turning Library

Articles and information about wood turning, wood turners, and wood turning tools.

 

To Order:
Online--use the Serious Toolworks Online Form. Please fill out the Contact Info and Order Info sections completely.

Telephone--we would recommend printing the Contact Form, filling it out, and calling us at 1-800-211-1484 with your order.

We do not accept credit cards, but we will gladly enclose an invoice when we ship your order. Your payment will be due 15 days after you receive your tools.

Product Inquiries:
Please call us at 1-800-211-1484, e-mail us at info@serioustoolworks.com, or fill out our online Serious Toolworks contact form to send us questions about our products, services and orders. We look forward to serving you with the finest in wood turning tools.

 

    www.serioustoolworks.con